Non-contractual image
LoRa 868 MHz module Ebyte E22 (SX1262)
An 868 MHz LoRa module on the Semtech SX1262 (Ebyte E22-900M22S), driven over SPI, 22 dBm out. The SX1262 reaches far on very little current, from a lone sensor to a gateway.
Use it with
868 MHz SMA male antenna 3 dBi (SR Passives)
868 MHz antenna with SMA male connector, 3 dBi gain, linear polarisation, 50 ohm. For a LoRa module, a sub-GHz sensor or a gateway.
Delivery within 2 to 4 business days.
SX1276 868 MHz LoRa module (RadioControlli)
SX1276 LoRa module on 868 MHz, SPI interface, -139 dBm sensitivity. The building block of a home LoRaWAN network.
Delivery within 2 to 4 business days.
CC1101 868 MHz SPI radio module (RadioControlli)
CC1101 module on 868 MHz, SPI interface, 10 dBm, -110 dBm sensitivity. The reference chip for OOK and sub-GHz work: shutters, remotes, sensors.
Delivery within 2 to 4 business days.
RC-RFSK1 868.35 MHz FSK receiver (RadioControlli)
Receive-only module on 868.35 MHz, -118 dBm sensitivity, 5 V supply. For listening to sensors or remotes with no transmit side.
Delivery within 2 to 4 business days.
RFM95PW 868 MHz 27 dBm LoRa module (HopeRF)
SX1276 LoRa module with built-in PA: 27 dBm output (half a watt) and -139 dBm sensitivity. For long-range links.
Delivery within 2 to 4 business days.
RFM23BP 868 MHz 30 dBm radio module (HopeRF)
868 MHz transceiver with a power amplifier: 30 dBm, a full watt. The most powerful in the catalogue, for difficult links.
Delivery within 2 to 4 business days.
CC1310 868 MHz radio module (RadioControlli)
Module built on CC1310: sub-GHz radio and Cortex-M3 in one chip, -124 dBm, 14 dBm. Very low power for a battery sensor.
Delivery within 2 to 4 business days.
HM-TRP 869 MHz UART radio module (HopeRF)
869 MHz transceiver driven over UART: no radio stack to write, just send bytes on the serial port. -117 dBm sensitivity.
Delivery within 2 to 4 business days.