Non-contractual image
Ebyte E80-900M2213S module (LR1121 multi-band)
Ebyte module built on LR1121: multi-band LoRa covering 868 MHz, 2.4 GHz and satellite S-band in one chip. For a product sold across continents.
Plugs into this board
Ebyte E22-900M22S LoRa module (SX1262)
Ebyte LoRa module built on SX1262, 868 MHz, 22 dBm transmit and -148 dBm receive. SPI interface, IPEX antenna connector. For a long-range low-power link.
Ebyte E220-900T22D LoRa module (UART)
LoRa module driven over UART: send bytes on the serial port and the module handles the radio. 22 dBm, 868 MHz. No LoRa stack to write.
Ebyte E32-900T20D LoRa module (SX1276)
SX1276 LoRa module, 868 MHz, 20 dBm, UART interface. The SX1276 is the most widespread LoRa chip, well documented and well tooled.
Ebyte E22-900M30S LoRa module (SX1262, 1 W)
SX1262 LoRa module with a power amplifier: up to 30 dBm, a full watt. On 868 MHz, EU rules cap transmission well below that (25 mW on most sub-bands, 500 mW ERP at best), so set the power to your band and country.
LoRa 868 MHz module Ebyte E22 (SX1262)
An 868 MHz LoRa module on the Semtech SX1262 (Ebyte E22-900M22S), driven over SPI, 22 dBm out. The SX1262 reaches far on very little current, from a lone sensor to a gateway.
Ebyte E220-900T30D LoRa module (UART, 1 W)
One-watt version of the UART LoRa module: 30 dBm output, serial port control. For long or congested links.